close
close
close

Tank Liners

Tank Liners

Waterplex selects the best tank liner material for you and then we customise them to suit most of your tanks. Waterplex two-part tank liners give you a peace of mind as we advise on the best way to install your liner while providing guidance on sealing around fittings. We're here to guide you every step of the way. Waterplex offers off-site fabrication and supply, on-site fabrication, and on-site fabrication and installation.

Open water tank liners are the most common form and are the primary means of waterproofing and liquid containment for the following types of tanks; new steel water tanks of almost any size; leaking steel water tanks; leaking poly plastic tanks; new concrete for site formed water tanks (i.e. Besa Block); and leaking concrete water tanks.

Open tank liners can be installed in almost any space provided there is adequate access for a person. Remember, when designing a water tank, you will need to allow for on-going access for any tank or pump maintenance. The materials that are used to manufacture the linings - such as polypropylene, polyolefin, DuPont Elvaloy, and PVC - are matched to suit the end use of the tank, including the type of tank and the type of liquid the tank is storing.

An advantage of open liners over enclosed liners is that submersible pumps can be used. Submersible pumps are a good solution where there is limited space outside the tank or if pump noise is potentially an issue.

Obviously, all OH&S and confined space precautions and regulations should be followed during installation.

sidebar:
  • Waterplex Tank Liner

    Waterplex

    Waterplex Tank Liner

    New and old water tanks all over Australia get the best treatment when they're installed with Waterplex Open Tank Liners. In fact, designing and supplying quality tank liners quickly is one of the things we do best. When you need a tank lined, it usually...

to top